NEGATIVE_OUTPUT_MONO

Published:2009/7/1 19:54:00 Author:May | From:SeekIC

Timer is wired to give negative output pulse for positive-going input trigger pulse. Width of output pulse in seconds is 1.1RC. Input pulse must be narrower than desired output pulse width. When reset pin is momentarily grounded, output returns to stable state. VCC is 4.5-16 V at 3-10 mA.-H.M. Berlin, IC Timer Review, 73 Magazine, Jan. 1978, p 40-45.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/NEGATIVE_OUTPUT_MONO.html

Print this Page | Comments | Reading(3)