Published:2011/4/21 1:06:00 Author:Ecco | Keyword: Motor vehicle, steering flasher | From:SeekIC
The motor vehicle steering flasher described in the example uses high-power transistors as electronic switches, the circuit is simple, easy to make.
The working principle
The motor vehicle steering flasher is composed of the flash circuit resistors R1-R3. Capacitor C, diode VD, transistors V1, V2, it is shown in Figure 7-21.
S is the vehicle turn signal switch; HLl and HL2 are the left turn signal and right turn signal respectively.
Before turning signal switch S (in the center), the oscillator circuit composed of vl, v2, and external RC components does not work. Placing S in the L or R position, the oscillation circuit works, V2 makes intermittent conduction with a certain frequency , Ll or HL2 is flashing.
Component selection
RI-R3 selects 1/4W carbon film resistor or metal film resistors.
C uses 25V electrolytic capacitors.
VD uses lN5402 silicon rectifier diode.
VI selects 3DGl2 or S8050 silicon NPN transistor; V2 uses 3AD30 germanium PNP transistors.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Motor_vehicle_steering_flasher_12.html
Print this Page | Comments | Reading(3)
Code: