Published:2012/11/4 21:11:00 Author:Ecco | Keyword: Intermittent operation | From:SeekIC
In some occasions, you need the motor to open and stop any time. This is called intermittent operation . The intermittent operation circuit is shown as the figure. In the Figure, S is a manual switch. Closing the S, KM and 1KT are simultaneously energized, KM main contact gets action, the motor M is running. After running for a period of time ( determined by 1KT time relay ), 1KT is delay closed, contacts are closed to turn on the relay K and other the relay 2KT circuit, K normally closed contacts disconnect, KM loses power, and M stops working.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Intermittent_operation_circuit.html
Print this Page | Comments | Reading(3)
Code: