High_pass_active_filter

Published:2009/7/24 13:41:00 Author:Jessie | From:SeekIC

This circuit uses an LM102 connected to form a basic high-pass filter (input capacitors in series and input resistor in parallel). The values are for 100-Hz cutoff. Other frequencies can be selected with different values. National Semiconductor, Linear Applications Handbook, 1991, p. 98.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/High_pass_active_filter.html

Print this Page | Comments | Reading(3)