Published:2012/10/21 22:51:00 Author:Ecco | Keyword: Frequency selective , photoelectric relay | From:SeekIC
The circuit can use modulated optical signal to control the relay. The modulation frequency is approximately 2.7kHz, and the selectivity of receiving circuit is determined by two parallel T-network. The parameters of RC elements decide narrow stopband with 2.7kHz center. Figure a shows controlling the circuit for transmitter portion of the circuit, and it uses a GaAs light emitting diode CQY12B, and two transistors constitute a multivibrator with 2.7kHz resonant frequency, and it outputs the rectangular wave pulse. It uses 250Ω potentiometer to accurately tune frequency.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Frequency_selective_photoelectric_relay_circuit.html
Print this Page | Comments | Reading(3)
Code: