TUNABLE_AUDIO_NOTCH_FILTER_CIRCUIT

Published:2009/7/5 22:09:00 Author:May | From:SeekIC

The circuit requires only one dual-ganged potentiometer to tune over a wide range ; if necessary over the entire audio range in one sweep. The principle used is that of the Wien bridge, fed from anti-phase inputs. The output should be buffered as shown with a FET input op amp, particularly if a high value pot is used. An op amp with differential outputs (eg., MC1445) may be used in place of the driver ICS; R2 may be made trimmable to optimize the notch.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Filter_Circuit/TUNABLE_AUDIO_NOTCH_FILTER_CIRCUIT.html

Print this Page | Comments | Reading(3)