Published:2011/4/25 3:27:00 Author:Ecco | Keyword: Easy-Downloader , SDCC | From:SeekIC
The hardware has a bit change at rs232 level converter. Now the circuit uses a popular rs232 level converter, MAX232. Also I cut the bridge diode at the DC input, now I use only one diode to prevent wrong polarity of a given DC adapter.
18 March 2004: found hardware schematic error at MAX232. The error is that pin 2 on the D-SUB 9 connector must be connected to pin 13 on the MAX232, not pin 8. The error had reported by Henrik Olesen, student at the University of Southern Denmark.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Easy_Downloader_V11_with_SDCC.html
Print this Page | Comments | Reading(3)
Code: