ELECTRONIC_CAR_HORN

Published:2009/7/6 3:41:00 Author:May | From:SeekIC

An LM556 dual oscillator/timer, U1, configured as a two-tone oscillator drives U2,a dual 4-watt amplifier. One of the oscillators, pins 1 to 6, contained in U1 produces the upper frequency signal of about 200 Hz, while the second oscillator, pins 8 to 13, provides the lower frequency signal of about 140 Hz. Increase or decrease the frequencies by changing the values of C2 and C3. U1's outputs,pins 9 and 5, are connected to separate potentiometers to provide control over volume and balance. Each half of U2 produces 4 W of audio that is delivered to two 8-Ω loudspeakers via capacitors C7 and C8.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/ELECTRONIC_CAR_HORN.html

Print this Page | Comments | Reading(3)