CDV700 Geiger Counter Probe Rebuilding

Published:2013/3/10 22:50:00 Author:Ecco | Keyword: Geiger Counter, Probe Rebuilding | From:SeekIC

This article describes the process of rebuilding a geiger counter probe from the Victoreen CDV700 geiger counter. The process of converting the hard-wired probe to a probe with a pluggable BNC connector is also described. The probe from the model CDV700-6B is similar, but not identical, the socket is easier to access on that model.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/CDV700_Geiger_Counter_Probe_Rebuilding.html

Print this Page | Comments | Reading(3)