CATHODE_COUPLED_MAIN_GATE_MVBR

Published:2009/7/16 12:37:00 Author:Jessie | From:SeekIC

Positive gate is d-c coupled from plate of normally-on tube to cathode follower whose cathode resistor is common with diode clamp of main-gate mvbr. Negative gate for unblanking is taken from plate that is a-c coupled to opposite grid of mvbr.-NBS, Handbook Preferred Circuits Navy Aeronautical Electronic Equipment, Vol. 1, Electron Tube Circuils, 1963, p N10-2.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/CATHODE_COUPLED_MAIN_GATE_MVBR.html

Print this Page | Comments | Reading(3)