Published:2011/5/12 1:43:00 Author:Ecco | Keyword: 5-bit, LED , level meter, driver , IC, basic application | From:SeekIC
10 LED level display circuit is composed of two pieces of BA6104.LED current limiting circuit is used to limit the LED current by connecting a resistor in parallel or series next to LED, it is shown as Figure (a), (b). When working voltageis higher than 9V, it could add a shunt resistor beside the LED current end, while the circuit with different specific Vcc values are shown in Fig.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/BL6124_5_bit_LED_level_meter_driver_IC_basic_application_circuit.html
Print this Page | Comments | Reading(3)
Code: