Index 422

Position: Home > Circuit Diagram > Basic Circuit > >Index 422

Low Cost Custom Prototype PCB Manufacturer

The PC Intergrated Circuit of the C75P036 Air-conditioner

Published:2011/5/10 22:00:00 Author:Borg | Keyword: Intergrated Circuit, Air-conditioner

The PC Intergrated Circuit of the C75P036 Air-conditioner

C75P036 is a air-conditioner intergrated circuit specially controled by singal door PCs, which is used in Midea, Hisense, Haier and Geli air-conditioners. 1.function feature C75P036 consists of three parts, i.e input circuit, central circuit controled by a micro computer and excuting drive circuit, in which the input circuit includes all kinds of signal handling circuit of the sensor test, protection circuit of signal handling and switch order handling circuits, the micro computer control center includes CPU,RAM,ROM and logic computing circuits, the excuting drive circuit includes all kinds of fans, compressors and four-way valve LEDs. 2.pin functions and data C75P036 intergrated circuits are packaged in a dual in-line way with 64 pinnings, whose pin fuctions and data are listed in Table 1. Table 1 pin fuctions and data of C75P036 (View)

View full Circuit Diagram | Comments | Reading(1332)

Transistor KK110F80 internal circuit

Published:2011/5/9 9:13:00 Author:Christina | Keyword: Transistor, internal circuit

The Transistor KK110F80 internal circuit is as shown: (View)

View full Circuit Diagram | Comments | Reading(364)

Capacitors Measured with Composite Pipe Circuit

Published:2011/5/10 2:22:00 Author:Felicity | Keyword: Capacitors Measured with Composite Pipe Circuit,

The picture above shows the Capacitors Measured with Composite Pipe Circuit . (View)

View full Circuit Diagram | Comments | Reading(595)

Circuit of Geminate Transistor Measured with Junction Field Effect

Published:2011/5/10 2:20:00 Author:Felicity | Keyword: Circuit, Geminate Transistor, Measured with Junction Field Effect,

The picture above shows the Circuit of Geminate Transistor Measured with Junction Field Effect. (View)

View full Circuit Diagram | Comments | Reading(672)

Transistor KK110F40 internal circuit

Published:2011/5/9 9:14:00 Author:Christina | Keyword: Transistor, internal circuit

The Transistor KK110F40 internal circuit is as shown: (View)

View full Circuit Diagram | Comments | Reading(358)

Transistor CTT181GK18 and CTT60GK08 internal circuits

Published:2011/5/9 9:22:00 Author:Christina | Keyword: Transistor, internal circuit

The Transistor CTT181GK18 and CTT60GK08 internal circuitsare as shown: (View)

View full Circuit Diagram | Comments | Reading(393)

Transistor CTT181GK12 and CTT181GK16 internal circuits

Published:2011/5/9 9:22:00 Author:Christina | Keyword: Transistor, internal circuit

The Transistor CTT181GK12 and CTT181GK16 internal circuitsare as shown: (View)

View full Circuit Diagram | Comments | Reading(380)

Transistor CTT116GK18 and CTT181GK08 internal circuits

Published:2011/5/9 9:22:00 Author:Christina | Keyword: Transistor, internal circuit

The Transistor CTT116GK18 and CTT181GK08 internal circuitsare as shown: (View)

View full Circuit Diagram | Comments | Reading(340)

Transistor CTD100GK08 and CTT116GK12 internal circuits

Published:2011/5/9 9:23:00 Author:Christina | Keyword: Transistor, internal circuit

The Transistor CTD100GK08 and CTT116GK12 internal circuits are as shown: (View)

View full Circuit Diagram | Comments | Reading(370)

Mini radio principle circuit

Published:2011/5/10 19:41:00 Author:Christina | Keyword: Mini radio, principle circuit

Mini radio principle circuit
Installation points: 1. Try to close to the circuit board when you are installing the components, and choose the correct vertical and horizontal installation way. 2. The welding time is less than 3 seconds, the special attention should be paid to the earplugs socket, ceramics capacitor, variable capacitor and switch to prevent damage. 3. Take or put the iron coil carefully to prevent the thrum abruptment. You need to remove the paint and add the tin before welding, and the components is fixed by the wax or double-sided adhesive after welding. 4. Try to install the earplugs socket near the lateral, and the installation is flat and exact. 5. The switch installation is flat and exact too. 6. The replacement of the transistor and integrated circuit don't make mistakes, also the pin. 7. You should pay attention to the tin absorption of the printing plate and the electric soldering iron head. Use the rosin reasonablly and avoid the virtual welding, false welding phenomenons. 8. Avoid using too many tin, the contact position of the electric soldering iron head and the circuit board must be accurately. Welding resistance components: R1: 100kΩ, color ring: brown black goldR2: about 1.5kΩ, color ring: palm green red goldR3: 33kΩ, color ring: orange orange orange goldR4: 2.7kΩ, color ring: red purple red goldR5: 39Ω, color ring: orange white blackR6: 39Ω, color ring: orange white black (View)

View full Circuit Diagram | Comments | Reading(1331)

Bipolar reversed circuit diagram composed of ISO100

Published:2011/5/10 20:58:00 Author:Ecco | Keyword: Bipolar , reversed

Bipolar reversed circuit diagram composed of ISO100 is shown as the chart. Comparing with unipolar reversed circuit, the connection method of pin 16 and pin 8 in bipolar reversed circuit is different. In bipolar reversed circuit, pin 16 and pin 15 are connected, pin 8 and pin 7 are connected, the other requirements are same to unipolar reversed circuit. (View)