Published:2009/7/6 2:23:00 Author:May | From:SeekIC
Regulator conducts and regulates until current demand is such that IR drop across RS is sufficient to overcome base-emitter junction potential of switch transistor QS, which is two 2N174 germanium transistors in parallel. Use 2 ohms for RS. QS is then turned on, with current/voltage regulation to its base controlled by regulator. Input voltage of 7812 regulatorshould be 2 V more than desired output voltage.
Article gives three different rectifier circuits suitable for use with regulator.-A. M. Clarke,Regulated 200 Watt-12 Volt D.C. Power Supply, CQ, Oct. 1975, p 28-30 and 78-79.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/12V_AT_20A.html
Print this Page | Comments | Reading(3)
Code: