Published:2011/8/29 2:07:00 Author:Seven | Keyword: regulator, power supply, monitor pin | From:SeekIC
The DS1830 programmable monitorThe working voltage is 2.7~4.75V; the 3 conditions of monitoring the microprocessor: power supply, software execution and external overload; the halt and restart failure microprocessor; It can restart the micro-processor automatically after the computer fault is gone; it has the external overload monitor key; the main function references are stored in the storage by the 3-line connector programme; the watch dog output time can be programmed from 25ms~12.5s, it can directly replace DS1232.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Automotive_Circuit/The_regulator__DC_DC_circuit_and_power_supply_monitor_pin_and_its_main_features_DS1830.html
Print this Page | Comments | Reading(3)
Code: