The pre-heat and indicator circuit of Nanjing Iveco light car

Published:2011/7/14 5:08:00 Author:Borg | Keyword: indicator circuit, light car | From:SeekIC

The pre-heat and indicator circuit of Nanjing Iveco light carWhen the engine water temperature is over 2℃, the system is not working. At the moment, the igniting switch is pulled to MAR gear, the pre-heat indicator 58101(with fuse mark) is only light 2S, or the indicator is put out, then the drive can start the engine. Then pull the key to the starting gear (AVV), the diesel engine is ignited immediately. If the engine water temperature is lower 2℃, the pre-heat system is working, the e-control box makes the indicator 58101 glow continuously for 35~40S, the fire injector is connected and heating. The lower the water temperature is, the longer the heating time is.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Automotive_Circuit/The_pre_heat_and_indicator_circuit_of_Nanjing_Iveco_light_car.html

Print this Page | Comments | Reading(3)