The main features of the amplifier pin signal--TL070/A JFET input op-amp

Published:2011/9/3 1:00:00 Author:Borg | Keyword: amplifier pin signal, JFET, input op-amp | From:SeekIC

TL070/A JFET input op-amp The input distortion voltage is 3mV; temperature drift is 10μV/℃; the biased current is 5pA; the gain band width is GB=3MHz; the rotating speed rate is 13V/μs; noise is 18nV/√Hz(1kHz); the differential mode input voltage is ±30V; the common input voltage is ±15V; the power consumption is 680mW.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Automotive_Circuit/The_main_features_of_the_amplifier_pin_signal__TL070_A_JFET_input_op_amp.html

Print this Page | Comments | Reading(3)