The main features of the amplifier pin signal--TL066/A/B programmable JFET input op-amp

Published:2011/8/23 22:14:00 Author:Borg | Keyword: amplifier, programmable JFET, input op-amp | From:SeekIC

TL066/A/BprogrammableJFETinputop-amp Input distortion voltage is 3mV; temperature drift is 10μV/⁰C; input distortion current is 30pA; gain band width is GB=1MHz; converting speed rate is 3.5V/μs; the noise 42nV/√Hz(1kHz); the current consumption is 200μA; ±1.2~±18V power supply; the differential mode input voltage is ±30V; the common mode input voltage ±15V; the power consumption is 680mW; the current of the changeable power supply is 5~200mA.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Automotive_Circuit/The_main_features_of_the_amplifier_pin_signal__TL066_A_B_programmable_JFET_input_op_amp.html

Print this Page | Comments | Reading(3)