BARGRAPH_CAR_VOLTMETER

Published:2009/6/24 4:08:00 Author:May | From:SeekIC

The LM3914 acts as a LED-driving vol-tometer that has its basic maximum and minimum readings determined by the values of R2 and RV2. When correctly adjusted, the unit actually covers the 2.5 volt to 3.6 volt range, but it is made to read a supply voltage span of 10-10.5 volts to 15 volts by interposing poten-tial divider R1-RV1 between the supply line and the pin-5 input terminal of the IC. The IC is configured to give a 'dot' display, in which only one of the ten LEDs is illuminated at any given time. If the supply voltage is below 10.5 volts none of the LEDs illuminate. Ifthe supply equals or exceeds 15 volts, LED 10 illuminates.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Automotive_Circuit/BARGRAPH_CAR_VOLTMETER.html

Print this Page | Comments | Reading(3)