Published:2012/9/3 1:07:00 Author:Ecco | Keyword: Loud, 10-W, Car Alarm Siren | From:SeekIC
By generating square-wave output that sweeps down and up in frequency, this circuit can produce force field of high-intensity sound inside car. This circuit can make a car thieve panics and decide to run before anyone catch his action. D1, C1 and R1 produce triangle waveform by shaping a square wave output of IC1. If using sweeping alarm sound is prohibited by regulation, then C1 can be removed to provide legal two-tone sound. The diodes are general purpose small signal silicon except D2 which is silicon rectifier rated 1 A at 50 PIV. This circuit can handle up to 10W depends on the horn loudspeaker. Here is the schematic diagram of the circuit:
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Audio_Circuit/Loud_10_W_Car_Alarm_Siren.html
Print this Page | Comments | Reading(3)
Code: