fast_dc_stabilized_inverting_amplifier

Published:2009/7/23 23:48:00 Author:Jessie | From:SeekIC

This circuit is similar to that of Fig. 1-21, except that the output is inverted, and the summing-point bias-current is low. Figure 1-22B shows operating waveforms for a 10-V output (trace A input, trace B output). Slew rate is about 100 V/μs, with full power bandwidth of 1 MHz. Output current is about 100 mA.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/fast_dc_stabilized_inverting_amplifier.html

Print this Page | Comments | Reading(3)