Low_noise_flat_frequency_response_preamplifier_using_an_ECG1020_thin_film_hybrid_module

Published:2009/7/20 2:44:00 Author:Jessie | From:SeekIC

Low-noise flat-frequency-response preamplifier using an ECG1020 thin-film hybrid module. At 1 kHz with the switch off typical voltage gain is 66 dB; with the switch on typical voltage gain is 42.5 dB (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/Low_noise_flat_frequency_response_preamplifier_using_an_ECG1020_thin_film_hybrid_module.html

Print this Page | Comments | Reading(3)