LOW_POWER_COMMON_SOURCE_AMPLIFIER

Published:2009/7/6 4:47:00 Author:May | From:SeekIC

A circuit that will operate in the 10- to 20- microamp range at a 12-volt supply voltage. The diode protection is available in this configuration. The circuit voltage gain will be between 10 and 20, with extremely low power consumption (approximately 250 μW).This is very desirable for remote or battery operation where minimum maintenance is important.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/LOW_POWER_COMMON_SOURCE_AMPLIFIER.html

Print this Page | Comments | Reading(3)