Published:2009/6/19 2:29:00 Author:May | From:SeekIC
Two of these audio amplifiers can be used to make a stereo amplifier 200W per channel. IRF640 and IRF9640 power MOSFETs are used to drive the output load, which might be 4 or 8Ω. Response is 12 Hz to 45 kHz (-3 dB), THD <0.1%. Power is supplied by a switching-type power supply, which is external to the amplifier (±47V). About 600 W total power (peak) is needed.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/Amplifier_Circuits-Audio/HIGH_POWER_AUDIO_AMP_FOR_AUTOMOTIVE_INSTALLATION.html
Print this Page | Comments | Reading(3)
Code: