2_watt_AF_phono_amplifier_using_an_ECG740A_14_pin_DIP

Published:2009/7/20 1:48:00 Author:Jessie | From:SeekIC

2-watt AF phono amplifier using an ECG740A 14-pin DIP. Supply voltage is typically 18 volts. Voltage gain is 34 dB. Minimum audio power output is 2 watt, with 2.5 watts typical. When driving a 16-ohm load the supply voltage at pin 14 should be 24 volts (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/2_watt_AF_phono_amplifier_using_an_ECG740A_14_pin_DIP.html

Print this Page | Comments | Reading(3)