22W Amplifier circuit for 12V Power Supply Systems

Published:2013/3/28 4:14:00 Author:Ecco | Keyword: 22W Amplifier, 12V Power Supply | From:SeekIC

This is a 22-W Amplifier circuit that is designed for or 12-V DC power supply Systems. There are many application for this circuit, such as in car audio application. In car electrical power supply system, the 12V power supply will be provided by the host vehicle’s battery. The capacitor C3 is used to give ripple rejection, since noisy power supply voltage is common in automotive electrical system. The power supply noise signal on car power supply is decoupled by the capacitors C2 and C1. Smaller capacitor C2 is needed to decouple the high frequency noise, since the larger cap (C1) usually has high equivalent series inductance that prevent the high frequency noise (such as glitch or spike) to be bypassed. The capacitors C5 couple the incoming audio signal to IC1 while decoupling static DC offset. For better bass response, this circuit prevent rolling off of the low audio frequencies by choosing a relatively large capacitance for small signal, 10μF capacitors. Here is the schematic diagram of the circuit:



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/22W_Amplifier_circuit_for_12V_Power_Supply_Systems.html

Print this Page | Comments | Reading(3)