1_watt_phonograph_amplifier_for_ceramic_cartridges_with_16_ohm_speaker

Published:2009/7/20 2:30:00 Author:Jessie | From:SeekIC

1-watt phonograph amplifier for ceramic cartridges with 16-ohm speaker. See table for component values. Sensitivity is approximately 450 mV. The gain of this amplifier is determined by (R7 + R10)/R5. To alter the gain, change R5 and hold (R7 + R10) between 1M and 2.2M. Bass boost can be eliminated by removing C4 and replacing (R7 + R10) with a fixed resistor value at 2.2M (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/1_watt_phonograph_amplifier_for_ceramic_cartridges_with_16_ohm_speaker.html

Print this Page | Comments | Reading(3)