Published:2011/8/17 3:16:00 Author:Rebekka | Keyword: water level control , reduction voltage rectification , 555 | From:SeekIC
To achieve the automatic control of water tower and water level,probes B and D are put in well. Under normal circumstances, it should be in a certain depth of water level. It makes the output terminal 3 of IC2(555) circuit turn to low level, J2 pull-in, J2-2 closed. Pumping continuously makes polar B and polar D expose from water, pin 2 turn to a low level. It makes IC2 turn-over position, pin3 turn to a high level, J2 release, J2-2 disconnect to avoid motor from idle running, then it willmonitor the water level of the well.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/555_Circuit/The_water_level_control_circuit_diagram_composed_of_reduction_voltage_rectification_circuit_and_555.html
Print this Page | Comments | Reading(3)
Code: