Published:2011/6/10 18:44:00 Author:nelly | Keyword: voltage double hresholds, automatical protector | From:SeekIC
The hypotension rectifier circuit provides IC and relay protection circuit with VDD=11V voltage source. 555 and sample network are connected into RS trigger work pattern. Because DW2 is connected, the 555 integrated chip internal comparator's reference voltage is clamped in V5=4V. The terigger terminal 2 foot is controlled by transfinite sample value, the reset terminal 4 foot is controlled by undervoltage sample value voltage. When 2 foot's sample value voltage is lower than 1/2 V5=2V, 4 foot's sample value voltage is higher than 0.7V reset voltage, 555 circuit sets, 3 foot is high level, relay J has no action, normally closed contact transport the voltage to load terminal, the power supply is normal, LED2(green)lights. When the voltage power is transfinite or undervoltage, 555 circuit is reset, 3 foot turns from high level to low level, J pulls in, the contact turns to emergency line, it has overvoltage and undervoltage protection for the load.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/555_Circuit/555_voltage_double_hresholds_automatical_protector_circuit.html
Print this Page | Comments | Reading(3)
Code: