Published:2012/2/6 0:24:00 Author:Amy From:SeekIC
WinSystems introduced two new PC-104 wide input range, DC/DC power supplies. The input voltage range is from 10 V to 50 VDC which enables them to work well with 12-V, 24-V, or 48-V battery operated or distributed DC power systems. The standard output voltage for the PCM-DC-AT500 is +5V at 20A. For the triple output PCM-DC-AT512, the voltages are +5 Vat 20 A, +12 V at 3 A, and -12 V at 0.5 A. Both versions will operate from -40°C to +85°C with no fans or heat sinks, and they are suited for applications in pipelines, transportation, communications, solar power, and military. All the outputs have overvoltage and short circuit protection plus overcurrent protection as well. Individual LED indicators display a visual status of each regulated output. Power is input through a standard two-pin plug and connector system for easy connection and removal. The output voltage is wired directly to the PC-104 connector.
On the PCM-DC-AT512, there are also two, four-pin connectors at the edge of the board to provide +5V and +12V to disk drives and other accessories. Both the PCM-DC-AT500 and PCM-DC-AT512 comply with PC/104 and RoHS certification. They measure 3.6” x 3.8” (90 mm x 96 mm).
Founded in 1982, the company manufactures and distributes embedded computers for use in industrial applications. The products include embedded PC-compatible single board computers, memory boards, input/output (I/O) and enclosures based upon the STD Bus and PC/104 Bus standard architecture.
Print this Page | Comments | Reading(596)
Author:Ecco Reading(33479)
Author:Ecco Reading(3534)
Author:Ecco Reading(3250)
Author:Ecco Reading(3816)
Author:Ecco Reading(5341)
Author:Ecco Reading(3318)
Author:Ecco Reading(3474)
Author:Ecco Reading(3620)
Author:Ecco Reading(4017)
Author:Ecco Reading(3819)
Author:Ecco Reading(3759)
Author:Ecco Reading(3789)
Author:Ecco Reading(6103)
Author:Ecco Reading(3778)
Author:Ecco Reading(4587)