Hittite Announced HMC1022 to Reach 48 GHz

Published:2011/10/31 22:51:00 Author:Phyllis From:SeekIC

Hittite Microwave Corporation has announced the release of a new Wideband GaAs pHEMT MMIC Distributed Power Amplifier die which is ideal for military EW, test and measurement equipment, and broadband telecom equipment applications up to 48 GHz.

The HMC1022 is a 0.25 Watt GaAs pHEMT MMIC Distributed Power Amplifier which operates between DC and 48 GHz. The amplifier provides 12 dB of gain, 32 dBm output IP3 and +22 dBm of output power at 1 dB gain compression while requiring 150 mA from a +10 V supply. The HMC1022 exhibits a slightly positive gain slope from 10 to 35 GHz, making it ideal for EW, ECM, Radar and test equipment applications.

The HMC1022 amplifier I/Os are internally matched to 50 Ohms facilitating integration into Mutli-Chip-Modules (MCMs). All data is taken with the chip connected via two 0.025 mm (1 mil) wire bonds of minimal length 0.31 mm (12 mils). Requiring only a few external bias decoupling components, the HMC1022 Wideband Distributed Amplifier was developed for simplified integration into Multi-Chip-Modules (MCMs) and other higher level assemblies and subsystems. The HMC1022 complements Hittite’s broad line of distributed low noise, driver, and power amplifiers, with frequency coverage up to 65 GHz.

The HMC1022 is a 0.25 Watt GaAs pHEMT MMIC Distributed Power Amplifier which operates between DC and 48 GHz. The amplifier provides 12 dB of gain, +32 dBm output IP3 and +22 dBm of output power at 1 dB gain compression while consuming only 150 mA from a +10 V supply. The HMC1022 exhibits a slightly positive gain slope from 10 to 35 GHz, making it ideal for EW, ECM, Radar and test equipment applications.

About Hittite Microwave

Hittite Microwave Corporation is an innovative designer and manufacturer of high performance integrated circuits, or ICs, modules, subsystems and instrumentation for technically demanding digital, RF, microwave and millimeterwave applications covering DC to 110 GHz. The Company’s standard and custom products apply analog, digital and mixed-signal semiconductor technologies, which are used in a wide variety of wireless/wired communication and sensor applications for Automotive, Broadband, Cellular Infrastructure, Fiber Optics & Networking, Microwave & Millimeterwave Communications, Military, Test & Measurement, and Space markets. The Company is headquartered in Chelmsford, Massachusetts.

Reprinted Url Of This Article: http://www.seekic.com/blog/IndustryNews/2011/10/31/Hittite_Announced_HMC1022_to_Reach_48_GHz.html

Print this Page | Comments | Reading(231)